Saturday, 14 July 2012

IKEA Hack #1 Slim BESTA Entertainment Unit

I had submitted this on a site among other ones, but only this one was published in December 2011. So I am going to build up the hacks I've done on my site so even if not submitted, they are here to be seen.

BESTA, INREDA Pull-out frame, INREDA Shelf insert, SNUDDA, Hole borer drill bit

Main objective was to minimise space of all my entertainment equipment. In previous flat I had metal brackets with cut to size shelves to hold all equipment above TV which worked well on the solid wall.But in new smaller flat, its hollow plasterboard walls & doubtful it could hold all the equipment, so had to be free-standing & I decided to use a Besta Wood effect tall unit. 

I measures the levels where the shelves were to go to give breathing room to equipment, done w/o TV at 1st as was planning more units to hang on wall over TV. I then measure evenly the holes to drill out & big enough to feed a plug through. Then it was a case of fitting the equipment in & wire it all up & put in its place. 

Few months later I found out this wood effect style had been discontinued & couldn't get any more Besta's to match, I decided to put TV inside the unit on a pull out drawer & have it swivel so I can watch TV from the PC desk. I used a plank of wood to sit TV on, the bearing mechanism of a SNUDDA lazy susan to swivel the TV. All bolted/screwed onto the INREDA Shelf insert sitting in the INREDA Pull-out frame. 

The remaining space is for boxes of knick-knacks using PAPPIS cardboard boxes, which 2 fits lovely on each shelf & I was able to fit 4 with room for power supply at the bottom for all the equipment. 

Tho it took a few months to get all of it together, it actually was 2 days work & look great next to the other Besta I was able to get & use as a display cabinet. next stage it to back light the units & then it will all be finished.

(I have moved since this blog & remodelled the design. The updated blog can be found here:

No comments:

Post a Comment